Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Stainless duct bend

Stainless duct bend, segmented

Fully welded, segmented duct bend in stainless steel AISI 304 for stainless ducting systems, Ø 80–600 mm and angles from 15° to 90°.

Pless no.
KB-710001
Range
180 variants
Fits product system
Fully welded stainless ducting system (AISI 304/316)
Product area
Stainless ducting systems

Segmented duct bend in stainless steel AISI 304 for fully welded stainless ducting systems. The bend is fully welded and has a glass-blasted surface as standard.

Design

  • Nominal diameter 80–600 mm, in 20 sizes.
  • Angles: 15°, 30°, 45°, 60° and 90°.
  • Bend radius 1.5 × D.
  • Wall thickness 0.8 or 1.0 mm, depending on the diameter.
  • End type LE or LF (loose flange).

How to choose

First choose the nominal diameter and angle, then the end type. For diameters above 400 mm a loose flange (LF) is recommended. The wall thickness follows from the diameter. Choose the size in the table and send an enquiry. In the enquiry you can also state the preferred assembly method, surface treatment and steel grade.

Variants

Applies to all variants: Steel grade (AISI) AISI 304, Bend radius (× D) 1.5

Find the right variant

Choose nominal diameter and angle in the table · one tap selects both
Nominal diameter in rows, angle in columns. Cells with content exist.
Nominal diameter (mm)Angle →15°30°45°60°90°
80
100
120
125
140
150
160
180
200
225
250
275
300
315
350
400
450
500
550
600

The number in a cell is the number of variants. A dot means the combination does not exist.

More filters
Wall thickness (mm)
End type
180 of 180 variants match your choices

180 variants. Type the size above, or show the full list.

Dimension drawing

Dimension drawing of a duct bend with diameter D, radius R and wall thickness S
Dimension drawing of a duct bend with diameter D, radius R and wall thickness S

Technical data

Material

Bend construction
segmented
Surface
glass-blasted
Construction
fully welded