Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

All models · Compressed air

R01 P - GassEx

Gas-Ex

R01 P - GassEx

  • GRP housing, stable and free of corrosion
  • Modular system, and it can be rebuilt later
  • Can run around the clock
  • Can be used in gas explosion zones 1, 2, 21 or 22
  • Suited to collecting combustible dust
  • For highly insulating materials, tested by Dekra Exam
  • Solvent-bearing material can be collected with an activated-carbon module (option)
  • As an option, for carcinogenic, mutagenic or hazardous substances (CMR)
  • Compressed-air drive (injector) in V2A, resistant to corrosion
  • With an extra compressed-air injector for a higher flow (option)

Brochure

Technical data

Housing
GRP
Vacuum (mbar)
-350
Air flow (m³/h), measured with a 3 m hose
255 - 490
Sound pressure (dB(A)), DIN EN ISO 3744
80
Pocket filter, dust class L and M (m²)
1,2/2,6
Residual-dust filter, dust class H (m²)
3,2
Height (mm), dust class L and M
970/1.223
Height (mm), dust class H
1.040/1.380
Width (mm)
520
Length (mm)
850
Volume (litres)
35
Suction connection (mm)
50/70
Operating pressure (bar)
5
Air flow (m³/h)
175
Duty
Komprimert luft
Drive
Venturi-injektor
GeKa coupling
Trykklufttilkobling 1/2" (tomme)

Technical data from Ruwac's Norwegian model overview.

The figures are as Ruwac publishes them. The right model and execution are agreed with Pless.

Ask for the right execution

R01 P - GassEx. Tell us about the dust, the liquid and where the machine will stand. We confirm whether this model is the right one.

What are you interested in?

Tick what applies, or write a message.