Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Rotary valve

Rotary valve series MD-S

Stainless steel rotary valve with UNI PN10 flanges, for use as explosion isolation to EN 15089. Four sizes (MD-S150–MD-S300), maximum differential pressure 1 bar.

Pless no.
CS-490009
Range
4 standard sizes, configured on enquiry
Product area
Material handling, valves and metering

Choose and send enquiry

A rotary valve is chosen by what it has to do, how much product has to pass through per hour and what kind of product it is. We go through the information you give and find the right size together with you.

1 What will the valve do?

Answer what you know. Everything is optional, and “don't know” is a good answer.

Use
kg/m³
More questions for a more precise quotation (7)
°C
Is there explosive dust or an explosive atmosphere (ATEX)?
Relevant when feeding into pneumatic conveying.
bar
Is the product in contact with food, feed or pharmaceuticals?
How often must the valve be cleaned inside?
Is the product abrasive?

2 Choose a size

The volume per revolution is the manufacturer's stated value at 100 % filling. How much the valve delivers per hour depends on the product's bulk density, the degree of filling and the speed. We work that out together with you.

See all technical data for the sizes

Applies to all sizes: Number of rotor blades 8

Compare only:
Rotary valve series MD-S: sizes compared
PropertyMD-S150MD-S200MD-S250MD-S300
Dimensions
Size150200250300
Gross weight (kg)95165215310
Performance
Capacity per revolution (l/rev)3112037

3 Construction

The standard choice is marked. If you are not sure, leave the choice open and we clarify it together with you.

4 Options

Additional optionsYou can choose more than one.

Technical data

Performance

Duty class
Medium-heavy duty
Application
Flameproof / explosion isolation system
Max differential pressure
1 bar
Min operating temperature
-15 °C
Max operating temperature (standard)
60 °C

Material

Housing material (standard)
MD-S was developed as a valve series made entirely of AISI 316 stainless steel

Safety

ATEX marking
CAT II 1/**D Ex h IIIC T135°C (**2 of 3), zone 21 or 22, possible as option
Flameproof explosion isolation
Explosion Isolation Systems EN 15089: resistance certified up to 1.7 bar with Vulkollan tips, 2.5 bar with steel tips

Installation

Bearings (standard)
External supports with outside ball bearings

Certification

Food contact
EC Regulation 1935/2004 material compatibility available on request