Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Material handling, valves and metering

Rotary valves and equipment for metering and transferring bulk material between process steps.

Material handling, valves and metering

Cellesluse serie VPR-BHNorwegian only
Cellesluse for dosering av pulver under vakuum, særlig i pastaproduksjon. Hus i nikkelbelagt støpejern og rustfri rotor, som standard eller Easy Clean. Fem størrelser (VPR180-BH–VPR350-BH).
Rotary valve
5 standard sizes, configured on enquiry
CONVO rope conveyor
Enclosed, dust-tight conveying of powders and granules, gentle and at low speed. Size, routing and design are adapted to the plant.
Rope conveyor
3 standard sizes, configured on enquiry
Rotary valve series ExR
Metering rotary valve with large inlet and direct drive, also available in an EX-certified version as an explosion barrier. UNI PN10 flanges, four sizes (ExR150–ExR300), maximum differential pressure 1 bar.
Rotary valve
4 standard sizes, configured on enquiry
Rotary valve series MD-S
Stainless steel rotary valve with UNI PN10 flanges, for use as explosion isolation to EN 15089. Four sizes (MD-S150–MD-S300), maximum differential pressure 1 bar.
Rotary valve
4 standard sizes, configured on enquiry
Rotary valve series RS
Heavy-duty drop-through rotary valve for feeding pneumatic conveying lines and for metering powders and granules. Eight standard sizes.
Rotary valve
8 standard sizes, configured on enquiry
Rotary valve series RS/ex
RS rotary valve in ex version, flameproof and pressure-shock resistant up to 10 bar to EN 15089, for potentially explosive areas. Six sizes (RS/ex180–RS/ex450).
Rotary valve
6 standard sizes, configured on enquiry
Rotary valve series SF
Blow-through rotary valve that meters powders and granules straight into the pneumatic conveying line through a side outlet. Eight sizes (SF150–SF600), maximum differential pressure 1 bar.
Rotary valve
8 standard sizes, configured on enquiry
Rotary valve series SMD
Hygienic rotary valve with quick disassembly (Easy Clean): the rotor comes out without tools and the internal surfaces are polished. UNI PN10 flanges, four sizes (SMD150–SMD300), maximum differential pressure 1 bar.
Rotary valve
4 standard sizes, configured on enquiry
Rotary valve series UPH
Drop-through rotary valve for the pharmaceutical, chemical and food industries, with large inlet, direct drive and UNI PN10 flanges. Four sizes (UPH150–UPH300), maximum differential pressure 1 bar.
Rotary valve
4 standard sizes, configured on enquiry
Rotary valve series UPR
Heavy-duty rotary valve for plastic flakes and granules, with inlet and outlet shaped to prevent jamming, and external bearings. UNI PN10 flanges, three sizes (UPR200–UPR300), maximum differential pressure 1 bar.
Rotary valve
3 standard sizes, configured on enquiry
Rotary valve series VBM
Light rotary valve with closed rotor for gravity metering under filters and cyclones. Several can be mounted in line on a frame with shaft couplings. Three sizes (VBM230–VBM300), maximum differential pressure 0.25 bar.
Rotary valve
3 standard sizes, configured on enquiry
Rotary valve series VPR
General-purpose drop-through rotary valve with round inlet and good air tightness, also for feeding pneumatic conveying lines. Seven sizes (VPR100–VPR400), maximum differential pressure 1 bar.
Rotary valve
7 standard sizes, configured on enquiry
Rotary valve series VPS
Light drop-through rotary valve with closed rotor and round inlet, for metering and discharge under filters, cyclones and in down pipes. Six standard sizes (VPS180–VPS400), maximum differential pressure 0.25 bar.
Rotary valve
6 standard sizes, configured on enquiry