Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Rotary valve

Rotary valve series RS

Heavy-duty drop-through rotary valve for feeding pneumatic conveying lines and for metering powders and granules. Eight standard sizes.

Pless no.
CS-490001
Range
8 standard sizes, configured on enquiry
Product area
Material handling, valves and metering

Heavy-duty drop-through rotary valve for feeding pneumatic conveying lines and for metering. It is used for powders and granules in conveying lines with low to medium pressure.

Main features

  • Eight standard sizes from RS150 to RS600, with a capacity of 2 to 120 l per revolution and 8–12 rotor blades
  • Maximum differential pressure 1 bar
  • Operating temperature −15 to 60 °C in the standard version, up to 220 °C in the heat-resistant version
  • Cast iron housing and covers as standard, ball bearings, standard colour RAL 9001
  • ATEX version for zone 21 or 22 available as an option
  • Material compatibility for food contact according to Regulation (EC) No 1935/2004 can be supplied on request

Choices in the enquiry

In the enquiry you specify, among other things, the housing material (cast iron, nickel-plated cast iron or stainless AISI 316 up to size 300), rotor type and blade material, drive arrangement (bare shaft, chain drive with geared motor, direct drive or variable-speed geared motor), high-temperature, quick-release or direct-drive versions, surface treatment, temperature requirements and the required differential pressure. Temperatures above 220 °C are clarified separately.

Choose and send enquiry

A rotary valve is chosen by what it has to do, how much product has to pass through per hour and what kind of product it is. We go through the information you give and find the right size together with you.

1 What will the valve do?

Answer what you know. Everything is optional, and “don't know” is a good answer.

Use
kg/m³
More questions for a more precise quotation (7)
°C
Is there explosive dust or an explosive atmosphere (ATEX)?
Relevant when feeding into pneumatic conveying.
bar
Is the product in contact with food, feed or pharmaceuticals?
How often must the valve be cleaned inside?
Is the product abrasive?

2 Choose a size

The volume per revolution is the manufacturer's stated value at 100 % filling. How much the valve delivers per hour depends on the product's bulk density, the degree of filling and the speed. We work that out together with you.

See all technical data for the sizes
Compare only:
Rotary valve series RS: sizes compared
PropertyRS150RS180RS230RS270RS300RS350RS450RS600
Dimensions
Size150180230270300350450600
Inlet opening (mm)155 × 105190 × 118238 × 135276 × 148340 × 198470 × 238570 × 285635 × 356
Outlet opening (mm)155 × 105190 × 118235 × 135276 × 158340 × 198476 × 220570 × 285695 × 356
Gross weight (kg)5967971351903185751,100
Performance
Capacity per revolution (l/rev)24812204080120
Number of rotor blades88888101012

3 Construction

The standard choice is marked. If you are not sure, leave the choice open and we clarify it together with you.

4 Options

Additional optionsYou can choose more than one.

Technical data

Performance

Principle
Drop-through rotary valve
Duty class
Heavy duty
Application
Pneumatic conveying inlet or dosing
Max differential pressure
1 bar
Min operating temperature
-15 °C
Max operating temperature (standard)
60 °C
Max operating temperature (heat-resistant)
220 °C

Material

Housing material (standard)
Cast iron housing and covers
Standard colour
RAL 9001

Safety

ATEX marking
CAT II 1/**D Ex h IIIC T135C (**2 of 3), zone 21 or 22, possible as option
Flameproof explosion isolation
Separate series RS/ex: Explosion Isolation Systems EN 15089, pressure resistance certified to 10 bars

Installation

Bearings (standard)
Ball bearings (external supports with outside ball bearings possible)

Certification

Food contact
EC Regulation 1935/2004 material compatibility available on request