Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Rotary valve

Rotary valve series UPH

Drop-through rotary valve for the pharmaceutical, chemical and food industries, with large inlet, direct drive and UNI PN10 flanges. Four sizes (UPH150–UPH300), maximum differential pressure 1 bar.

Pless no.
CS-490006
Range
4 standard sizes, configured on enquiry
Product area
Material handling, valves and metering

Choose and send enquiry

A rotary valve is chosen by what it has to do, how much product has to pass through per hour and what kind of product it is. We go through the information you give and find the right size together with you.

1 What will the valve do?

Answer what you know. Everything is optional, and “don't know” is a good answer.

Use
kg/m³
More questions for a more precise quotation (7)
°C
Is there explosive dust or an explosive atmosphere (ATEX)?
Relevant when feeding into pneumatic conveying.
bar
Is the product in contact with food, feed or pharmaceuticals?
How often must the valve be cleaned inside?
Is the product abrasive?

2 Choose a size

The volume per revolution is the manufacturer's stated value at 100 % filling. How much the valve delivers per hour depends on the product's bulk density, the degree of filling and the speed. We work that out together with you.

See all technical data for the sizes

Applies to all sizes: Number of rotor blades 8

Compare only:
Rotary valve series UPH: sizes compared
PropertyUPH150UPH200UPH250UPH300
Dimensions
Size150200250300
Gross weight (kg)95165215310
Performance
Capacity per revolution (l/rev)3112037

3 Construction

The standard choice is marked. If you are not sure, leave the choice open and we clarify it together with you.

4 Options

Additional optionsYou can choose more than one.

Technical data

Performance

Principle
Drop-through rotary valve
Application
For pneumatic conveying inlet or dosing
Max differential pressure
1 bar
Min operating temperature
-15 °C
Max operating temperature (standard)
220 °C

Material

Housing material (standard)
Cast iron or stainless steel body and covers

Safety

ATEX marking
CAT II 1/**D Ex h IIIC T135°C (**2 of 3), zone 21 or 22, possible as option

Installation

Bearings (standard)
External supports with outside ball bearings, also for high temperature (max. 220 °C)

Certification

Food contact
EC Regulation 1935/2004 material compatibility available on request