Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Duct branch

Galvanised branch pipe

Galvanised branch pipe with a 30° or 45° branch, in sizes from Ø 80 to Ø 500 mm.

Some texts on this page are currently available in Norwegian only.

Pless no.
AT-710024
Range
139 variants
Product area
Galvanised duct systems

Galvanised branch pipe for joining or dividing the air flow in a duct system. The branch pipe has a straight main run with the branch placed in the middle.

Design

  • Branch angle 30° or 45°.
  • Sizes from 80 to 500 mm on the main run and the branch.
  • Wall thickness 0.9 mm.
  • End type as shown in the table.

How to choose

Choose the angle and sizes in the table and send an inquiry. Other combinations can be made to order.

Variants

Applies to all variants: Wall thickness 0.9 mm, End type FB

Find the right variant

Choose angle (°) · 2 available with your choices
139 of 139 variants match your choices

139 variants. Type the size above, or show the full list.

Dimension drawing

Dimension drawing of a galvanised 30° branch pipe with dimensions A, B, C and L1–L3
Dimension drawing of a galvanised 30° branch pipe with dimensions A, B, C and L1–L3
Dimension drawing of a galvanised 45° branch pipe with dimensions A, B, C and L1–L3
Dimension drawing of a galvanised 45° branch pipe with dimensions A, B, C and L1–L3

Technical data

General

Surface treatment
galvanised