Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Galvanised duct systems

Galvanised duct pipes, bends, branches, dampers, couplings, pipe holders and caps.

Galvanised duct systems

Clamping band with handle
1 mm clamping band with adjustable handle and snap lock, without hinge, Ø 140–500 mm.
Clamping band
13 variants
Clamping band with hinge
Clamping band with hinge and adjustable handle for quick installation of small ducts, Ø 80–125 mm.
Clamping band
3 variants
EPDM sealing ring
EPDM rubber sealing ring that makes clamping band joints tighter, Ø 80–300 mm.
Duct coupling
13 variants
Galvanised branch pipe
Galvanised branch pipe with a 30° or 45° branch, in sizes from Ø 80 to Ø 500 mm.
Duct branch
139 variants
Galvanised clamping band
Two-part galvanised 1 mm clamping band for joining duct parts, Ø 80–500 mm.
Clamping band
18 variants
Galvanised clamping band, wide
Wide galvanised clamping band for joining larger duct parts, Ø 150–800 mm.
Clamping band
20 variants
Galvanised duct bend, pressed
Pressed galvanised duct bend from 7.5° to 90°, Ø 80–400 mm.
Duct bend
180 variants
Galvanised duct bend, segmented
Segmented galvanised duct bend from 7.5° to 90°, Ø 275–1000 mm.
Duct bend
157 variants
Galvanised duct pipe
Galvanised duct pipe for extraction and pneumatic conveying, Ø 80–1000 mm in lengths of 0.5, 1 and 2 m.
Duct pipe
186 variants
Galvanised duct pipe with cleaning spigot
Galvanised duct pipe with a 100 mm cleaning spigot and an easily removable cover, Ø 100–400 mm.
Duct pipe
15 variants
Galvanised duct pipe with inspection hatch
Galvanised 0.5 m duct pipe with a fitted inspection hatch for inspection and cleaning, Ø 80–800 mm.
Duct pipe
24 variants
Galvanised false air valve
Galvanised false air valve where the false air is adjusted by turning the outer casing, Ø 80–450 mm.
Dampers and sliding dampers
17 variants
Galvanised flange
Round galvanised flange for duct systems, Ø 80–1250 mm, in five profiles from 25 × 3 to 40 × 6.
Duct coupling
34 variants
Galvanised hose spigot
Galvanised hose spigot for connecting a hose to the duct system, Ø 80–400 mm.
Duct reducer
16 variants
Galvanised jet cap
Galvanised jet cap for discharge above the roof, Ø 120–1250 mm.
Cap
56 variants
Galvanised pipe holder
Galvanised pipe holder for suspending duct systems, Ø 80–850 mm, in profile 28 × 2 or 40 × 3.
Duct support
29 variants
Galvanised quick coupling M09
Galvanised M09 quick coupling for fast, tight joining of duct parts, Ø 80–400 mm.
Duct coupling
16 variants
Galvanised quick coupling with red insert
Galvanised quick coupling with bolt and red insert for larger ducts, Ø 425–800 mm.
Duct coupling
12 variants
Galvanised rain cap with cone and skirt
Galvanised rain cap with internal cone and skirt, Ø 225–1250 mm.
Cap
44 variants
Galvanised rain cap with skirt
Galvanised rain cap with skirt that protects the duct outlet from rain, Ø 80–1250 mm.
Cap
62 variants
Galvanised reducer
Galvanised reducer between two duct diameters, from Ø 100–500 mm down to Ø 80–450 mm.
Duct reducer
45 variants
Galvanised reducer, pressed
Pressed galvanised reducer, from Ø 100–300 mm down to Ø 80–250 mm.
Duct reducer
15 variants
Galvanised saddle branch
Galvanised saddle branch with a 30° or 45° branch for connecting a branch duct, Ø 80–500 mm.
Duct branch
36 variants
Galvanised sliding damper with thumb screw
Galvanised M21 sliding damper with thumb screw for closing off a duct branch by hand, Ø 80–400 mm.
Dampers and sliding dampers
16 variants
Galvanised telescopic pipe, single
Galvanised 0.5 m telescopic pipe for adjusting the length of the duct system, Ø 80–500 mm.
Duct pipe
36 variants
Galvanised throttle damper
Galvanised throttle damper with handle for stepless control of the air volume, Ø 80–800 mm.
Dampers and sliding dampers
24 variants
Galvanised throttle damper, tight
Tight galvanised throttle damper with handle for stepless control, Ø 80–550 mm.
Dampers and sliding dampers
19 variants
Galvanised throttle damper, tight, electric actuator
Tight galvanised throttle damper with electric actuator, 230 V or 24 V, Ø 80–500 mm.
Dampers and sliding dampers
36 variants
Galvanised throttle damper, tight, pneumatic
Tight galvanised throttle damper with pneumatic actuator, Ø 80–500 mm.
Dampers and sliding dampers
36 variants
Galvanised Y-piece
Galvanised 30° Y-piece that divides one duct into two branches, Ø 80–500 mm.
Duct branch
17 variants
Leg for galvanised pipe holder
Leg for galvanised pipe holder, for pipe diameters Ø 80–800 mm.
Duct support
14 variants
Rubber flange, oil-resistant
Oil-resistant rubber flange for round flanges, Ø 80–1250 mm.
Duct coupling
30 variants
Sliding damper, electro-galvanised, pneumatic
Electro-galvanised sliding damper with pneumatic cylinder and solenoid valve, 230 V or 24 V DC, Ø 80–600 mm.
Dampers and sliding dampers
54 variants
Sliding damper, electro-galvanised, standard
Electro-galvanised sliding damper with a manual slide for closing off a duct branch, Ø 80–500 mm.
Dampers and sliding dampers
27 variants