
Dampers and sliding dampers
Galvanised sliding damper with thumb screw
Galvanised M21 sliding damper with thumb screw for closing off a duct branch by hand, Ø 80–400 mm.
- Pless no.
- SP-710026
- Range
- 16 variants
- Product area
- Galvanised duct systems
Galvanised sliding damper for closing off a branch of the duct system by hand. The design is M21 with a thumb screw.
Design
- Nominal diameter 80–400 mm.
- Design M21 with thumb screw.
- Wall thickness 1.25 or 1.5 mm.
- End type as shown in the table.
How to choose
Choose the nominal diameter in the table and send an inquiry.
Variants
Applies to all variants: End type f.lyn, Design M21 with thumb screw
Find the right variant
Choose nominal diameter and wall thickness in the table · one tap selects both
| Nominal diameter (mm)Wall thickness (mm) → | 1.25 | 1.5 |
|---|---|---|
| 80 | · | |
| 100 | · | |
| 120 | · | |
| 125 | · | |
| 140 | · | |
| 150 | · | |
| 160 | · | |
| 180 | · | |
| 200 | · | |
| 225 | · | |
| 250 | · | |
| 275 | · | |
| 300 | · | |
| 315 | · | |
| 350 | · | |
| 400 | · |
✓ exists, a dot does not exist.
16 of 16 variants match your choices
| 80 | 1.25 | |
| 100 | 1.25 | |
| 120 | 1.25 | |
| 125 | 1.25 | |
| 140 | 1.25 | |
| 150 | 1.25 | |
| 160 | 1.25 | |
| 180 | 1.25 | |
| 200 | 1.25 | |
| 225 | 1.5 | |
| 250 | 1.5 | |
| 275 | 1.5 | |
| 300 | 1.5 | |
| 315 | 1.5 | |
| 350 | 1.5 | |
| 400 | 1.5 |
Dimension drawing

Technical data
General
- Surface treatment
- galvanised