Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Pipes for pneumatic conveying

Couplings, hoses and clamps: how the line is joined

Couplings, gaskets, hoses and clamps join a pneumatic line together. Tell us what you want to connect, and we help you choose.

· 2 min read

Pipes and machines in an industrial plant

How the line is joined

A pneumatic line consists of many parts. Pipes, bends and transitions must be joined to each other. The couplings do that. Together with the bends and the transitions, they do the heaviest work when air moves powder and granulate.

We at Pless Industri in Skien supply pipe systems from the German manufacturer HS Umformtechnik. In the range you will find the pipe coupling DVK 6. You will also find DVK-HD® in a standard version, with a quick-release lock or with strain relief. DVK-HD® is also available anodised. In addition, there is a stainless steel pipe coupling in 1.4301 and a DVK 6 for glass pipes.

A coupling needs a gasket. For the DVK couplings there is a flat gasket, and there is a spare gasket. The gasket is a small part, but it is easy to forget when you order. In the range you will also find strain relief as a separate part, an earthing strap and a dust cap.

Rigid pipes do not always go the whole way. At the machine, something often needs to bend or move. That is where the hose takes over. On our page you will find the conveying hoses Master-PUR H, Master-PUR HX and Master-PUR Performance, and a PVC hose for conveying.

A hose must be connected at both ends. The hose couplings come in two families. Storz is available as a hose coupling, a fixed coupling and a blind coupling, and there is a Storz key. Kamlock is available as a female part and a male part. Which one you need depends on what is already fitted on your machine.

Finally, the hose must be fastened. The clamps do that. You will find a round bolt clamp, the Master-Grip hose clamp and a worm drive clamp. A U-clamp for C-profile and a suction lance are also in the range. In short, you can divide it all into five groups:

  • Pipe couplings: DVK 6 and DVK-HD®
  • Gaskets: flat gasket and spare gasket for DVK couplings
  • Hoses: Master-PUR and PVC hose
  • Hose couplings: Storz and Kamlock
  • Clamps: round bolt clamp, Master-Grip, worm drive clamp and U-clamp

You do not need to know all the names. Tell us instead what you want to connect. Is it pipe to pipe, pipe to hose or hose to machine? Also tell us which product runs in the line. Then we help you choose material and dimension in a conversation. If you are wondering which coupling, hose or clamp you need, you can ask us at Pless. You will find the range on the page for the pipe systems from HS Umformtechnik.

See the pipe systems from HS Umformtechnik

Written by Pless Industri. Illustrative photo.