Skip to content

New website. Enquiries and messages reach us, but no email receipt is sent yet.

Pipes for pneumatic conveying

Pipes, branches and transitions in pneumatic conveying

A transition is part of the system, not just a piece between two pipes. Think through the whole line before you order.

· 2 min read

TIG welding of stainless steel pipe branches at HS Umformtechnik

The transition is part of the system

Most of a pneumatic line is straight pipe. There, powder and granulate have a clear path. But no line is only straight. Somewhere it has to split. Somewhere it has to change dimension. Somewhere it has to connect to a machine.

At these points, the flow changes. Air and product must find a new path. Together with the bends and the couplings, the transitions do the heaviest work in the line. So a transition is not just an in-between piece. It is part of the system, and it should be chosen as carefully as the pipe.

We at Pless Industri in Skien supply pipe systems for pneumatic conveying from the German manufacturer HS Umformtechnik. The straight pipes come in two stainless steel grades, in aluminium and in glass. Ask us which one suits the product and the environment at your site.

Branches and T-pieces split the line, or join two lines into one. Reducers sit where the line changes dimension. The threaded nozzle is a socket with a thread. The materials in the list below are not the same for all the parts. So look at the whole line at the same time.

Does your product wear on the pipe? Then it also wears in the branch and in the reducer. Both are available in wear-resistant HVA NIRO®. We choose material and dimension together with you in a conversation. Tell us what you move and what the line looks like today. This is what you can ask us about:

  • Straight pipes: stainless steel 1.4301, stainless steel 1.4404, aluminium and borosilicate glass 3.3
  • Branches and T-pieces: stainless steel 1.4301, HVA NIRO®, aluminium AlMgSi 0.5 and borosilicate glass 3.3
  • Reducers: stainless steel 1.4301, HVA NIRO® and borosilicate glass 3.3
  • Threaded nozzle: stainless steel 1.4301

Do not choose material for the straight pipes first and the rest afterwards. Think through the whole line before you order, including branches and reducers. It is a good idea to have a simple sketch ready when you get in touch. Draw in where the line splits, where it changes dimension, and where it meets the machine. Also write down which product runs in the line. Then we get to the point faster. If you are wondering which pipes and transitions you need, you can ask us at Pless. You will find the range on the page for the pipe systems from HS Umformtechnik.

See the pipe systems from HS Umformtechnik

Written by Pless Industri. Photo from production at HS Umformtechnik, used with permission.